Free Gun Classifieds - Used Guns - OutdoorsTrader.com
ERGO Roller lever for Hornady Lock N Load AP Press
Ad Posted:	3/25/2012 12:17:46 AM
Ad Expire:	6/23/2012 12:17:46 AM
Posted By:	1in9twist
Category:	Reloading > Reloading
Ad Description:
View Ad Details I do like my Hornady Lock-N-Load set-up, but the factory knob and lever on the Lock & Load leaves room for improvement.. If standing you have to drop your shoulder or lean over to get the full down stroke. Sitting is better, but still a little awkward. The ball on the factory lever is a little abrasive as well. So, I set out to remedy these minor problems and create a lever that makes reloading on the LNL more enjoyable. The first bend in the lever orients the shaft so it runs parallel with the rest of the press linkages, the 2nd bend opens up access to the right side of the shellplate at rest position, the 3rd bend creates a downward action for ultra smooth priming operation. When the lever is in the down position, bends 2 and 3 bring the roller handle up from the factory position so you don’t have to lean over or drop your shoulder to get the full “upstroke” of the press. The lever positions you nicely in front of the press, so that you can see directly down into the case to check powder content prior to setting a bullet. The levers are lathe cut & threaded, machine formed, acid etched primer is applied then coated with black enamel. They are very strong, comfortable and the addition of the quality roller bearing handle tops it off as an awesome addition to your press! I also offer a 100% no BS guarantee. Work it, abuse it, load your socks off with it, and if you happen to decide that you don't like it, I will buy it back. (Minus shipping, to be fair)